User Tools

Site Tools


2016:nsrc-tein-lernet:l2-net-design-alt

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
2016:nsrc-tein-lernet:l2-net-design-alt [2016/03/17 03:43]
philip [Spanning Tree Protocol]
2016:nsrc-tein-lernet:l2-net-design-alt [2016/03/17 03:43] (current)
philip [Set up SNMP access on the Border router]
Line 260: Line 260:
  
  
-===== Set up SNMP access on the Border router ​=====+===== Set up SNMP access on the Switches ​=====
  
 Later in the week we're going to start using SNMP to manage the routers and switches. We'll add the necessary commands at this stage: Later in the week we're going to start using SNMP to manage the routers and switches. We'll add the necessary commands at this stage:
Line 271: Line 271:
 The access-list only allows SNMP queries from the NMM server. ​ The access-list only allows SNMP queries from the NMM server. ​
  
-If your router ​doesn'​t take the above snmp commands, try the following instead. Even though Cisco IOS is one operating system, the implementation details on different platforms can well be different:+If your switch ​doesn'​t take the above snmp commands, try the following instead. Even though Cisco IOS is one operating system, the implementation details on different platforms can well be different:
  
   access-list 99 permit 100.68.X.130   access-list 99 permit 100.68.X.130
2016/nsrc-tein-lernet/l2-net-design-alt.txt ยท Last modified: 2016/03/17 03:43 by philip